400W Small Wind Turbine
|FOB Price:||US $400 / Piece|
|Min. Order:||1 Piece|
|Min. Order||FOB Price|
|1 Piece||US $400/ Piece|
|Production Capacity:||10000 PCS/Year|
|Transport Package:||Plywood, Nylon Containers|
|Payment Terms:||L/C, T/T|
- Model NO.: MINI 400W
- Rotating Shaft: Horizontal
- Rated Outpower: 400W
- Rotor Diameter: 1.16m
- Cut-in Wind Speed: 2.5(M/S)
- Wind Turbine Controller: MPPT Charge Controller System
- Weight: 6.8 Kg
- Trademark: MINI
- Origin: China
- Number of Blade: Multiple-Blade
- Stress Way of Blade: Resistance
- Max Outpower: 450W
- Start-up Wind Speed: 2.0( M/S)
- Voltage: 12, 24 VDC
- Kilowatt Hours Per Month: 32 Kwh/Mo at 3.2 M/S
- Certificate: CE RoHS ISO
- Specification: 400w
The carrier also sealed deals to transport wind turbines, wind power systems, mechanical and electrical products, as well as construction materials for building new power plants...
Mini small wind generator characteristics:
1. Low start-up wind speed
Low wind speed series small wind turbines generate more than 30% effective power than the same rotor diameter wind turbine annually.
2. High-efficient generator system
Three-phase permanent magnet synchronous small wind generator, more than 10% of the efficiency of ultra-GB, starting resistance, only be 1/3 of the GB limit, motor insulation rating class h insulation.
3. MPPT power management system
Built-in a new intelligent controller, monitoring the wind turbines operation in real-time MPPT(maximum power point tracking) charge.
4. Noise reduction innovative technology
Start and product electricity at the 1.5m/s, noise only at dB at 13m/s/.
5. Perfect wind wheel system
The wind turbine generator wheel are made of a low temperature resistance, aging high strength compound material, can cope with a variety of complex wind conditions, charge wind energy into electrical energy efficiently and sustainably...
6. Unique design of the rudder
Small wind turbine generator rudders are ale to respond to the wind speed and wind direction flexibly, enhancing the efficiency of power generation.
Wind turbine siting
Small changes in wind speed and wind direction can have a dramatic effect on power production. In general, the higher the tower, the greater the wind speed and ultimately power production. Therefore, the siting of your wind turbine shouldbe carefully considered. Each installation is different and is often a compromise among tower height, distance from the battery bank, local zoning requirements and obstacles such as buildings and trees.
Specific requirements about installation and sitting of wind turbine are as follows:
1 the minimum recommended tower height is 8m on open ground or 5m above nearby obstructions (fig. 1), there are no obstacles within 100 meters as far as possible;
2 if install two wind turbines on one area, the distance between them is 8-10 times of rotor diameter. Try to locate the wind turbine in the "cleanest" turbulent free air as possible. Turbulence will reduce the efficiency of the wind turbine and may accelerate wear on rotating components.
3 less natural disaster places are preferred.
Safety must be the primary concern when selecting the mounting location. Even if installing the wind turbine in a less than ideal location, don't attempt to mount the turbine while blades are spinning.
Our company has been involved in the Beijing Olympic Games and the Asian Games in Guangzhou, national large-scale construction of energy-saving projects, participation in Guangzhou Toyota Moto, China Unicom, the Olympic Park real estate, Sichuan ABA State household power supply and other large-scale wind and solar monitoring and the street lights project construction.
Domestic Sales: +86 020-39211683 +86 020-23889679
Foreign Sales: +86 020-86359576 Fax: +86 020-39388854
Address: Room 305-306, Hi-Tech Exchange Center, Tian An Hi-Tech Ecological Park, 555 Panyu Avenue North. Panyu District, Guangzhou, China
|Rated Capacity||400 watts at 28 mph (12.5 m/s)|
|Shipping Dimensions||770x 410x 200 mm (8.8kg)|
|Mount||1.5 in schedule 40 1.9 in (48 mm) OD pipe|
|Start-Up Wind Speed||2.0 ( m/s)|
|Cut-In Wind Speed||2.5(m. s)|
|Voltage||12, 24 VDC|
|Turbine Controller||Microprocessor-based smart internal regulator with Maximum Power Point Tracking|
|Blades||5 PC Nylon Fiber|
|Overspeed Protection||Electronic torque control|
|Kilowatt Hours per Month||32KWh/mo at 3.2 m/s|
|Survival Wind Speed||35 m/s|
|Warranty||3 year limited warranty|